Fans & Assemblies

Penta Pack Series

    • FAN PACK ASSEMBLIES
    • PENTA 154
    • PENTA 172
    • PENTA 200
    • ECONOMY SERIES
    • Variable Speed Range(RPM)
    • 400-2,300
    • 400-2,300
    • 400-2,300
    • 400-2,300
    • Output Power Range (W)
    • 0 - 25w
    • 0 - 25w
    • 0 - 25w
    • 0 - 25w
    • Voltage/Frequency
    • 120/230-240; 50/60Hz
    • 120/230-240; 50/60Hz
    • 120/230-240; 50/60Hz
    • 120/230-240; 50/60Hz
    • Number of Speeds
    • 3
    • 3
    • 3
    • 3
    • Reversible
    • Yes
    • Yes
    • Yes
    • Yes
    • Customer Programmable
    • Yes
    • Yes
    • Yes
    • Yes
    • Available with
    • UNADA UC Series
    • UNADA UC Series
    • UNADA UC Series
    • UNADA UC Series
    • IP55/IP67 Ingress Protection
    • Yes
    • Yes
    • Yes
    • Yes
    • ATEX Compliance
    • Optional
    • Optional
    • Optional
    • Optional
    • Food Grade Materials
    • Optional
    • Optional
    • Optional
    • Optional
    • Fan Blade Diameter
    • 154 mm (6 inch)
    • 172 mm (7 inch)
    • 200 mm (8 inch)
    • 154-254 mm (6-12 inch)
    • Fan Blade Type
    • Plastic
    • Plastic
    • Plastic
    • Aluminum & Metal
    • Effciency
    • Very High
    • Very High
    • Very High
    • High
    • Noise
    • Very Low
    • Very Low
    • Very Low
    • Low

PENTA FANPACK SERIES

PENTA 154 Fanpack

Specifications

EC FANPACK ASSEMBLY

Bottle Coolers | Display Cases Ventilation

Specifications

Rated voltage 100 - 240 Vac (+/-10%), 50/60Hz
Temperature range -40℃ to +50℃
Rated Current 0.29 amp @ 100-240; 50/60Hz (90-253VAC)
Absorbed powers 30W
Rated speed 400 to 2300rpm (+/-1%)
Speed selection 3 discrete programmable speeds.
Direction of rotation CCW, CW, reversible
Reverse speed Timed reverse programmable options.
Motor protection Electronically / Thermally Protected
Ground protection Double Insulation
Insulation class Class B
Bearing 608 sealed ball bearings
Approvals UL / TÜV / CE / RCM / CCC / ATEX*
Ingress protection IP65 / IP67*
*Option on request: Please discuss with our representative.

PENTA FANPACK SERIES

PENTA 172 Fanpack

Specifications

EC FANPACK ASSEMBLY

Bottle Coolers | Display Cases Ventilation

Specifications

Rated voltage 100 - 240Vac (+/-10%), 50/60Hz
Temperature range -40℃ to +50℃
Rated Current 0.29 amp @ 100-240; 50/60Hz (90-253VAC)
Absorbed powers 30W
Rated speed 400 to 2300rpm (+/-1%)
Speed selection 3 discrete programmable speeds.
Direction of rotation CCW, CW, reversible
Reverse speed Timed reverse programmable options.
Motor protection Electronically / Thermally Protected
Ground protection Double Insulation
Insulation class Class B
Bearing 608 sealed ball bearings
Approvals UL / TÜV / CE / RCM / CCC / ATEX*
Ingress protection IP65 / IP67*
*Option on request: Please discuss with our representative.

PENTA FANPACK SERIES

PENTA 200 Fanpack

Specifications

Bottle Coolers | Display Cases Ventilation

Specifications

Rated voltage 100 - 240 Vac (+/-10%), 50/60Hz
Temperature range -40℃ to +50℃
Rated Current 0.25 amp @ 230VAC 50/60Hz / 0.42 amp @ 120VAC 50/60Hz
Absorbed powers 35W
Rated speed 400 to 2300rpm (+/-1%)
Speed selection 3 discrete programmable speeds.
Direction of rotation CCW, CW, reversible
Reverse speed Timed reverse programmable options.
Motor protection Electronically / Thermally Protected
Ground protection Double Insulation
Insulation class Class B
Bearing 608 sealed ball bearings
Approvals UL / TÜV / CE / RCM / CCC / ATEX*
Ingress protection IP65 / IP67*
*Option on request: Please discuss with our representative.

PENTA FANPACK SERIES

ECONOMY SERIES Fanpack

Specifications

EC FANPACK ASSEMBLY

Bottle Coolers | Display Cases Ventilation

Specifications

Rated voltage 100 - 240Vac (+/-10%), 50/60Hz
Temperature range -40℃ to +50℃
Absorbed powers 0.25 amp @ 230VAC 50/60Hz / 0.42 amp @ 120VAC 50/60Hz
Rated speed 400 to 2300rpm (+/-1%)
Speed selection 3 discrete programmable speeds.
Direction of rotation CCW, CW, reversible
Reverse speed Timed reverse programmable options.
Motor protection Electronically / Thermally Protected
Ground protection Double Insulation
Insulation class Class B
Bearing 608 sealed ball bearings
Approvals UL / TÜV / CE / RCM / CCC / ATEX*
Ingress protection IP65 / IP67*
*Option on request: Please discuss with our representative.

A solution for every application

    • Programmable
    • Direction CW/CCW
    • Reverse on Start
    • Set Speed on Start
    • Single Speed
    • 3-Speed
    • Reverse on Demand
    • Constant Volume
    • Fully Variable Speed
    • U-Bus Serial Comms
    • 2-Wire
    • 3-Wire
    • PWM
    • U-BUS

OEM Options

  • Pre programmed or factory/field programmable speeds

  • You get to set the motor parameters

  • Provides you the transparency and traceability

  • Metric, imperial, or custom hardware

  • 3 speed, reversible, or timed-reverse options

  • - Motor reverses direction of rotation during defrost and keeps condenser coils clean and more efficient. This reduces energy and service costs.

  • Real time continuously variable speed control

  • Bluetooth App

    Multiple pairing up to 6 devices. Data logging for 6 devices.

  • Datalogger; log data in laboratory or in the field

  • PWM

  • Simple PWM input for control of motor parameters.

  • U-BUS
    System

The Launcher

Interface Development Tool

  • Increase the speed of development with LAUNCHER
  • Control fans using the standard off the shelf controller PWM, 0-10V or MODBUS available, or use the UNADA 8 bit open protocol.
  • Allows you to fully customize by setting your own desired parameters
  • Select toque or speed control modes.
  • Data acquisition enabled
  • Cost effective
  • 0-10V
  • 4-20mA
  • 0-5V
  • UART
  • USB

Installation

Foot Mount
  • 2 Studs (Optional)
Rear Mount
  • Rear Mount with metal threaded inserts M4 and 8-32 UNC available.
  • Plastite self-tapping screws in 3 hole or 4 hole configuration (screws not included available on request)
Fan Fixing

M4 screw with flat washer on female shaft thread or M / 10–32 UNF nut on male shaft thread.

Fan Mount

4 stud impeller mount to suit imperial or metric impellers

Basket Mount

Studs 1 positions.

High Effiency

Commercial refrigeration system fan motors use a lot of power. This is especially problematic in evaporator fans, because excess power is converted to heat, which the compressor must extract. It is critical to make fan motors as efficient as possible. That’s why Unada’s EC motors maintain high efficiency – up to70 percent – over a very wide range of loads. Compare that to the typical shaded-pole motor’s 20-percnet efficiency. Unada’s EC motors use less than 1/3 the power the shaded-pole motor needs and adds the COP and capacity benefits of reduced heat load in the cold space. Glass door merchandizers using plug-in systems can cut electricity consumption by as much as 30 percent by switching to Unada’s EC motor. The Unada’s smart control features increase power conservation even further tuning airflow to the precise system needs.

Long Life

Unada’s EC motors last longer than shaded-pole motors because they run cooler and have better starting torque. UC+ motors include several reliability-enhancing features

  • Surge protection up to 4000 volts
  • Safeguards against sustained under and over voltage
  • Multiple redundant protections against water on the cable and shaft entry
  • Corrosion-proof plastic housings
  • Intelligent thermal protection reduces motor poweduring overloads to maintain airflow to the refrigeration system
  • Soft starting to reduce transient loads and noise

Flexibility

UC+ motors can be set to wide power ranges, are factory or field programmable and are equipped with pluggable cable. This one motor can cover all of your needs. Fewer part numbers = more productivity.

Silent Operation

With the most advanced electronic control in its class UC+ is particularly suited to applications where both noise reduction and efficiency are critical. UC+ maintains its high efficiency and low noise characteristics across
the full range of power and speed.

Smart Control

Unada’s unique third-wire design allows motor programming in or out of the cooler, variable speed control, and programmable reversibility and three-speed operation all in a single motor version. Simply by connecting the third
(black) wire to a switched phase output, such as the compressor switch or Wellington controller, you can add a second speed, direction change, or programmed behavior such as delayed start/stop, all without extra connections
or opening a programming hatch.

IP Rating

The UC+ motor is an energy-efficient, unit bearing style ECM motor built to withstand harsh commercial refrigeration environments and cleaning practices. The motor’s innovative design locks out dust, withstands high pressure
water from any direction and water submersion for up to 30 minutes, giving it a remarkable IP55 and IP67 rating.The UC+ motor is an energy-efficient, unit bearing style ECM motor built to withstand harsh commercial refrigeration
environments and cleaning practices. It locks out dust, withstands high-pressure water from any direction and submersion for up to 30 minutes, for remarkable IP55 and IP67 ratings.

Easy to Install

Drop-in replacement for Q-Frame or unit-bearing motors

Fan Assembly

UC+ motors are can be used with most axial fans from 154 to 254 millimeters (6 to 10 inches) and for tangential fans up to 300 millimeters. Long-shaft versions are available for agitator applications.

Download our Free Commercial Refrigeration Motors Brochure